Model Number	SWW-240-6
Brand Name	sanweihe

The machine is packing for mosquito mat.Superior quality and timely delivery.

he basic process is as follows:

   Blank mats35×22×2.8mmare stacked vertically by hand andautomatically feed blank mats to following section.

   The blank mat is injected with a fixed amount of Pynamin Forte.

   The impregnated mats are automatically wrapped by laminated film.

   The laminated film is cut into sets, each one containing 3 or 15 pieces of mats.

   The detector function automatically stops the machine if a mat is wrapped withoutbeing injected, or it is not wrapped (selective).

Operation speed:       About 480-630 mats/min/6lines (variable)

Injection amount:       About 30mg-300mg (variable)

Required size of mat:   About 35×22×2.8mm±0.1mm

Packing film:   OPP/PE,CPP/PE, OPP/AL/PE, OPP/AL/PE (235-240MM/W×500-1000M/L/roll)

Solution Tank:     30liters with agitation motor & heater (W/temperature controller)

Heater:          Sealroll 1.5KW & solution tank 300 W

Cutting position & method:   Straight cutting and perforation

Main drive motor:    0.75KW & single phase (Frequencyconverter to step-less speed regulation)

Power consumption:     About 2.6KW